babialab

How Do You Turn On the Binance Withdrawal Whitelist? Address Book, New Address Lock and Turning It Off

Updated 2026-11-04 · 32 min read · Account Security

The Binance Withdrawal Whitelist is a switch in the account security settings. Once it is on, the account can only send assets to addresses that have been added to the whitelist in the address book, and every other address is rejected. To turn it on, log in, open the security settings, add your regular addresses in address management first, and then flip the whitelist switch. Before you start, make sure you have registered and completed identity verification on the Binance Official Site, and installed the Official Binance App on your phone. iPhone users can follow the iOS installation tutorial on this site. Around November 2026, menu names and button positions on the security pages may change slightly, so always follow what the Binance App currently shows.

What the Withdrawal Whitelist Is and What Changes Once It Is On

The withdrawal whitelist restricts where funds can be sent to a list of addresses that you have already confirmed. Without it, anyone who gets into the account and passes verification can type in any new address and start a withdrawal. With it, even if the password and verification codes both leak, an attacker cannot send assets to a personal address, because that address is not on the list.

The feature protects one exit only, the withdrawal, and it does not replace login protection. Google Authenticator, the anti-phishing code and device management each cover a different step, and the whitelist is the last gate in that chain. The table below compares the account with the whitelist on and off.

Item Whitelist off Whitelist on
Allowed destination addresses Any address, typed in each time Only addresses added to the whitelist
When entering a new address Passing verification is enough to withdraw The address must be whitelisted first, and a new address may enter a lock period
Risk if the account is hijacked The attacker can withdraw all assets The attacker can only withdraw to whitelisted addresses
Day-to-day effort Low, change addresses at any time Higher, a new address must go through the adding process
Best suited for Users who rarely withdraw and hold small balances Users who hold meaningful assets and use fairly fixed addresses

What to Prepare Before Turning It On

Complete the basic account verification before enabling the whitelist, otherwise adding an address can stall because a verification method is missing. Binance usually asks for two kinds of verification when an address is added: an email code, and either a Google Authenticator code or an SMS code.

Preparation checklist:

  1. Identity verification (KYC) is complete and withdrawals work normally.
  2. Google Authenticator or another 2FA method supported by Binance is linked, so the account does not depend on SMS alone.
  3. The email inbox receives mail normally and an anti-phishing code is set, which makes real and fake emails easier to tell apart.
  4. The Binance App on the phone is updated to the current version, because menu paths follow the newer layout.
  5. The addresses to whitelist are decided in advance: your own cold wallet, deposit addresses at other exchanges and regular payees.

Copy each address from the recipient's wallet or the exchange's deposit page beforehand, and check the network as well. The same coin can have the same or different address formats across networks. USDT, for example, commonly runs on TRC20, BEP20 and ERC20, and the addresses must not be mixed up, because a wrong network can make the assets unrecoverable.

Step 1: Open Security Settings and Find Withdrawal Address Management

Log in to your account on the Binance Official Site, or open the Binance App that is already installed on the phone. In the App the entry is usually: tap the avatar at the top left of the home screen, open the account center, choose "Security", then look for "Withdrawal Whitelist" or "Address Management". On the web the path is similar: avatar at the top right, Account, Security. The menu may be labeled "Withdrawal Address Management" or "Address Book" in different versions. It is the same feature, so go by what the page shows.

Two things appear on that page: a list of saved addresses and the whitelist switch. It is better not to switch the whitelist on yet. First enter every needed address in the list, then turn the whitelist on last, so that the restriction does not block you halfway through.

Step 2: Add Withdrawal Addresses to the Address Book

Adding an address requires the coin, the network, the address and a label, and some coins also require a Memo or Tag. The meaning of each field and the usual mistakes are listed below.

Field Meaning Common mistake
Coin The asset to withdraw, such as USDT, BTC or ETH Choosing a similarly named coin
Network The chain type, such as TRC20, BEP20 or ERC20 Not matching the network the recipient supports
Address The full string provided by the recipient Typing by hand, missing characters, or a clipboard hijacker replacing it
Label A tag for your own reference, such as "cold wallet" or "OKX deposit" Leaving it empty and later not knowing which entry is which
Memo / Tag An extra identifier some chains use to tell recipient accounts apart Leaving it out, so the funds arrive but cannot be credited
Add to whitelist Whether the address is marked as a whitelisted address Assuming that saving an address equals whitelisting it

On the Binance page, saving an address and adding it to the whitelist can be two separate actions: the address book is a contact list, and the whitelist is the list of addresses actually allowed for withdrawals. Look for an option such as "Add to whitelist" when saving, and follow the page prompts.

Step 3: Pass Verification to Save the Address

After the address is submitted, Binance asks for security verification. A common combination is an email code plus a Google Authenticator code. Check the anti-phishing code in the email to confirm the message is genuine, and then enter the code on the page.

Codes expire, and too many wrong attempts can trigger a temporary restriction, so do not try repeatedly. If the email does not arrive, check the spam folder and confirm the email address has not been changed, instead of pressing resend again and again. Once the address is saved successfully, a record appears in the list, and its status follows what the page displays.

Step 4: Switch On the Withdrawal Whitelist

After the addresses are entered, go back to the whitelist page and turn on the switch worded along the lines of "Only allow withdrawals to whitelisted addresses". Enabling it also requires 2FA and email verification. Once it is on, the withdrawal page changes: the address field normally becomes a selection from the whitelist, and pasting a brand new address is no longer possible.

Go back to the withdrawal page right after enabling it and check that the address you just saved appears in the dropdown. If it cannot be selected, the whitelist option was not ticked when the address was added, and it needs to be corrected in address management.

Step 5: Make a Small Test Withdrawal

When using a new address for the first time, withdraw a very small amount first and send the real amount only after it arrives. A small test checks three things at once: the network choice is right, the address was not tampered with, and the receiving platform recognizes deposits on that chain.

The test amount must still cover the minimum withdrawal amount and the network fee that Binance applies to that coin. Those figures differ by coin, network and time, so use the "Minimum withdrawal" and "Fee" shown on the Binance withdrawal page. Arrival time also depends on network congestion. TRC20 and BEP20 are generally quicker, while ERC20 can be slower when the network is busy, and the page normally shows an estimated time that you should follow.

How the New Address Lock Works

A new address lock means that an address newly added to the whitelist cannot be used for withdrawals immediately, or that withdrawals to it are delayed for a while. Binance uses this buffer to stop an attacker from quietly adding their own address and withdrawing everything right away, which gives the owner time to notice something is wrong.

The exact lock duration, scope and way to release it depend on the account's security settings, the region and the app version. This guide does not state a fixed number, so watch the prompt on the Binance App when adding an address, because the page shows when the address becomes usable. If a withdrawal is urgent, do not try to "unlock" it through unofficial channels, and do not trust anyone claiming they can bypass the lock for you.

Practical habits during the lock:

  1. Add regular addresses ahead of time instead of waiting until a transfer is urgent.
  2. If a "new address added" email arrives during the lock and you did not do it, treat the account as compromised immediately.
  3. If the page lets you cancel an address that has not taken effect yet, cancel it first and then check it again.

Editing, Deleting Addresses and Turning the Whitelist Off

The content of a whitelisted address usually cannot be edited directly, so the address has to be deleted and added again. This design stops anyone from quietly swapping an old address for their own. Deleting also requires verification, and once deleted the address can no longer be used for whitelisted withdrawals. To use it again, the adding process must be repeated, and it may enter the new address lock again.

The entry to turn the whitelist off is normally the same switch on the same page. Turning it off also needs 2FA and email verification, and in some cases withdrawals on the account may be restricted for a period afterward, as the page prompt indicates. Because turning it off requires verification too, an attacker who gets login access cannot simply disable the whitelist and withdraw. When a withdrawal to a new address is needed, the safer approach is to add the new address and wait for it to take effect, rather than switching off the whole whitelist.

How the Withdrawal Whitelist Differs From Other Security Features

The whitelist, the anti-phishing code, device management and the API IP whitelist all sound protective, but they manage different steps and cannot replace one another.

Feature What it protects Restricts withdrawal addresses Problem it addresses
Withdrawal address whitelist The withdrawal exit Yes Assets cannot be moved out after an account takeover
Anti-phishing code Authenticity of official emails and notices No Spotting emails that imitate Binance
Device management Logged-in devices No Removing an old phone or a suspicious device
API IP whitelist The origin of API key calls No, it restricts IPs A leaked key used by a trading bot
Google Authenticator Login and action verification No Stopping login with the password alone

A common mix-up is treating the API IP whitelist as the withdrawal whitelist. The former limits which servers can call the interface, and the latter limits which addresses assets can be sent to. The two have to be set separately.

Risks and Security Reminders When Using the Whitelist

The whitelist reduces the loss after a hijack, but it does not remove every risk. Pay attention to the following:

  • Check the first and last characters when adding an address: some malware replaces the address on the clipboard during copy and paste, so compare the first 6 and last 6 characters with the recipient's original address.
  • Do not whitelist an address someone else gives you without checking: a "payment address" from a stranger or one pasted in a group chat can be a scam.
  • Never add addresses through links in emails: do every adding step only on the Binance website or in the Binance App, and do not click links in emails.
  • Do not keep screenshots of verification codes or 2FA keys: once the phone gallery syncs to the cloud, the key is effectively left in a public place.
  • Keep the network and coin consistent: the whitelist stores a combination of address and network, and withdrawing on the wrong network may make the assets unrecoverable.
  • Keep the email account secure: if the mailbox is taken over, the attacker may also receive the email codes, so enable 2FA on the mailbox itself.

All address management and whitelist actions should be completed on the Binance website or inside the Official Binance App, and Binance account details, verification codes or 2FA keys should never be entered on any third-party page.

Users in mainland China should pay attention to local rules on virtual currency activities and assess compliance risks themselves. This site is an independent third-party tutorial site and is not Binance. Cryptocurrency trading involves price volatility and the risk of losing assets, so act within what you can afford.

FAQ

Q: Is the Binance withdrawal whitelist on by default? A: Usually it is not on by default, and users have to switch it on in the security settings. Whether it is on by default and what the entry is called follow what the Binance App currently shows.

Q: Can I still withdraw to a new address after turning the whitelist on? A: Yes, but the new address must first be added to the whitelist and verified, and in some cases a new address has a lock period. The page shows the lock time directly, and this guide does not give a fixed figure.

Q: I added an address but cannot find it when withdrawing. What is the cause? A: There are three common causes: the address was saved but not ticked for the whitelist, the coin or network selected differs from the one used when the address was added, or the new address is still in its lock period. Go back to address management and check these three items.

Q: Can I edit the label or content of a whitelisted address? A: Whether label-type information can be edited follows the page, but the address itself usually cannot be changed and has to be deleted and added again. This is designed to prevent an address from being swapped quietly.

Q: If the account is hijacked, can the whitelist still protect my assets? A: If the whitelist is already on and the attacker has not turned it off or added a new address, assets can only go to addresses on the list, which lowers the risk clearly. If the attacker also holds the email and 2FA, a new address can still be added, so the email notice for new addresses and the lock period matter. When something looks wrong, freeze the account right away and contact official Binance support.

Q: Is it troublesome to turn the whitelist off? A: Turning it off requires 2FA and email verification, and in some cases withdrawals are restricted briefly afterward, as the page prompt states. If the goal is only a one-time withdrawal to a new address, adding that address is safer than turning off the whole whitelist.

Q: Is the withdrawal whitelist the same thing as the API IP whitelist? A: No. The withdrawal whitelist limits which addresses assets can be sent to, and the API IP whitelist limits which IPs can use an API key. Users who run trading bots should set up both.